| View previous topic :: View next topic |
| Author |
Message |
rudamigos
Joined: 29 Dec 2009
Posts: 12
|
 Posted: Wed Aug 29, 2012 4:58 pm Post subject: wide foot pegs 74 Elsinore cr250m options? |
 |
|
I want to put some wide foot pegs on my 74 Elsinore cr250m. I see VMX & AMS sell them. Anybody have some input on the pegs these vendors sell or another vendor. What`s your thoughts / advice?
Scotty |
|
| Back to top |
|
 |
mike.t
Joined: 18 Aug 2005
Posts: 37
Location: colorado
|
| Posted: Wed Aug 29, 2012 6:34 pm Post subject: |
|
|
| The wider pegs are like getting reborn,main reason i didnt stand up much when riding,there great add on's try dan, dapperdan@gmail.com he takes your pegs and ads on cleats,butt they look like the pegs on my 08 yz 250,50.00 I got them for my 75 kx 400 and my vr montesa,tell him mike sent you,good luck mike. |
|
| Back to top |
|
|
jbmoore313
Joined: 31 Dec 2008
Posts: 3
|
| Posted: Thu Aug 30, 2012 8:08 pm Post subject: |
|
|
I have used Yamaha YZ250F pegs from a '01 & '02 models with great success. Minor grinding and a cut of one coil of the spring is all that is required. I'm sure other models pegs will work too if you look. Just make sure you weld the peg mounts where they attach to the frame - they are a known weak area that needs to be beefed up if you are going to race it.
John |
|
| Back to top |
|
|
phil
Joined: 08 Nov 2009
Posts: 4
|
| Posted: Thu Sep 06, 2012 12:24 am Post subject: DC Plastics |
|
|
Got mine for the 73 CR250 and 79 CR250 through Tom at DC Plastics good fast service even to New Zealand, recieved within a week usually.
Phil |
|
| Back to top |
|
|
|
